Overview of the Qualify User Interface [3:12]
An explanation of the Qualify User Interface.
What are Test and Reference Objects? [3:22]
Learn the foundation of how to use Geomagic Qualify with Test and Reference Objects.
How to Probe Cone Features [3:59]
Learn how to quickly create a cone using your probing device.
How to Probe Cylinder Features [6:00]
Learn how to quickly create a cylinder using your probing device.
How to Probe a Minimum and a Maximum Point [3:40]
Learn how to determine a minimum or maximum point using your probing device.
How to Probe a Plane Feature [2:32]
Learn how to quickly create a plane using your probing device.
How to Probe Surface Point Features [3:08]
Learn how to quickly probe a surface point on a planar surface.
Using Quick Probe [3:21]
Learn how to use the feature information present in a CAD reference model to automatically create features from probed data.
Using Iterative Alignment [3:38]
Learn how to move a hardware device to the coordinate system of a Reference object by picking three or more alignment targets directly on the Reference object.
How to Measure the Distance Between a Plane and a Maximum Point [3:54]
Learn how to use your probing device to determine the distance between a plane and a maximum point.
How to Measure the Angle Between Two Planes with a Probe [2:14]
Learn how to use your probing device to measure the angle between two planes.
How to Instantly Create Features on a CAD model with Quick Feature [1:41]
Learn how to easily create Features on a CAD Reference model.
How to Copy Features onto a Scanned Object Using AutoCreate [4:14]
Learn how to copy features from the CAD Reference object to scan data.
How to Automatically Rename Features with Feature Name Matching [2:20]
Learn how to automatically rename Features on the Test object to match those on the Reference object.
How to Edit Existing Features [2:05]
Learn how to modify the parameters of existing Features.
How to Create Cone Features [5:07]
Learn the four different methods for creating Cone Features.
How to Create Cylinder Features [5:10]
Learn the four different methods for creating Cylinder Features.
How to Create Oval Slot Features [4:15]
Learn the four different methods for creating 2D Oval Slot Features.
How to Perform a Best Fit Alignment [3:08]
Learn how to perform a Best Fit alignment and the various options.
How to Perform a Feature Based Alignment [2:58]
Learn how to perform an alignment using Features created in Geomagic Qualify.
How To Create a RPS Alignment [4:44]
Learn how to perform an alignment with corresponding points in Geomagic Qualify.
How to Perform a 3-2-1 Alignment [2:51]
Learn how to create a alignment using 3 matching planes in Geomagic Qualify.
How to Align Scan Data with Target Registration [2:40]
Learn how to register scans with one another using Target Registration.
How to Align data to the World Coordinate System [4:08]
Learn how to orient your data to the World Coordinate System
How to Compare Scan Data to a Reference using 3D Compare [4:19]
Learn how to compare your scans to a reference CAD object using Geomagic Qualify's 3D Compare.
How to Edit a Deviation Spectrum [2:50]
Learn how to modify the color deviation spectrum of many analysis commands.
How to Create a 2D Comparison [3:18]
Learn how to view a cross section of a 3D Compare Result using 2D Compare.
How to Create Deviation Annotations [5:05]
Learn how to Create deviation annotations on an object.
How to Create and Evaluate GD&T Callouts [6:12]
Learn how to to create GD&T callouts and how to evaluate them automatically.
How to Compare Features [3:28]
Learn how to compare measured or hard probed Features to the same Feature on a CAD model.
How to Annotate Features [3:26]
Learn how to create annotation callouts to show Feature properties and export these to a CSV report.
How to Perform a 2D Blade Twist Analysis [2:26]
Learn how to best fit a blade cross section to the nominal model and analyze the translation and rotation.
How to Perform a Multi-Airfoil Analysis [4:15]
Learn how to perform a Multi-Airfoil Analysis and create airfoil cross-sections.
How to Evaluate Wall Thickness [4:23]
Learn how to measure the thickness of parallel or almost parallel planes on a scan or Result object.
How to Create 3D Dimensions [7:11]
Learn how to measure dimensions on or between Features in 3D space.
How to Create Basic 2D Dimensions [4:53]
Learn how to create a cross section through a model and measure some basic 2D Dimensions on it.
How To Use Align Plane [3:52]
Learn how to use the Align Plane dialog.
How to Dimension an Airfoil Cross Section [4:28]
This video lesson will teach how to dimension an airfoil cross-section.
How to Use Batch Processing [3:33]
Learn how to use Batch Processing to run an automatic analysis on all of your scanned parts.
How to Create a Default Report [4:38]
Learn how to create a basic inspection report.
Qualify Complete Workflow [7:50]
Learn how to create a complete workflow using the Home Tab in Qualify.
Geomagic Interactive Scanning Guide
Discusses how to use scanning hardware, how to create a scanning plan, and provides tips for acquiring consistently good scans with the major scanner types.
Geomagic Qualify 2013 Interactive User Guide
Leads the advanced beginner through the fundamental workflow of Geomagic Qualify.
Video Product Demos
These Video Product Demos will give the user a general overview of Geomagic Studio and Geomagic Qualify usage and workflow.
To familiarize the user with the Best Fit, Feature-Based, and RPS Alignments.
Turbine Blade Inspection
Work through creating an inspection of a turbine blade.
How to Align to the World Coordinate System
Align the model to the world coordinate system by aligning feature planes to system planes.
Demonstrate the basic capabilities of Geomagic Qualify with a focus on GD&T and 2D dimensions.
Sheet Metal Inspection
A tutorial to familiarize a new user on the basic capabilities of Qualify.
*Tutorials and User Guides require Adobe Acrobat Reader.