Skip To Search Skip To Main Content

I have a thin walled part and I am seeing the contours on other side of the model during the Exact Surfacing phase. Is there a setting that will help with decrease seeing the other side of a thin walled model?

If you have a thin walled model and are seeing the other side of the model during the Shape phase, try setting the Triangle Offset to a smaller number. Triangle Offset adjusts the level of transparancy of the triangular mesh. A smaller number makes the triangles more opaque or solid.

 

This setting can be found under App Button>Options>Graphics>OpenGL>Offsets:

 

 

For example, on the following model the default Offset is 1.0:

 

 

Changing the default to a lower number, for example 0:

 

 

Setting the offset to an even lower number (-1.0) makes the contours disappear:

 

 


 

VERSION 11

If you have a thin walled model and are seeing the other side of the model during the Shape phase, try setting the Triangle Offset to a smaller number. Triangle Offset adjusts the level of transparancy of the triangular mesh. A smaller number makes the triangles more opaque or solid. This setting can be found under Tools>Options>Graphics>OpenGL>Offsets:

 

 

For example, on the following model the default Offset is 1.0:

 

 

Changing the default to a lower number, for example 0:

 

 

Setting the offset to an even lower number (-1.0) and now you can no longer see the contours:

 


Rating: 4 Votes 4 Yes Votes 100% voted yes
Was this answer helpful?
Provide Feedback on this Topic
Topic Information
  • Topic #: 5605-944
  • Date Created: 02/22/2010
  • Last Updated: 12/09/2014
  • Viewed: 1821
I have a thin walled part and I am seeing the contours on other side of the model during the Exact Surfacing phase. Is there a setting that will help with decrease seeing the other side of a thin walled model?
! ! ! !

Topic 5605-944

I have a thin walled part and I am seeing the contours on other side of the model during the Exact Surfacing phase. Is there a setting that will help with decrease seeing the other side of a thin walled model?

Knowledge Base